SKU: 69146609445

Ti Thorn from Covert Products Group

$27.00 $30.00
Save 10%
No.2 Bestseller on chemicals-recycling.com >

Pay in installments of $7.50 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 16 - Jul 21

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

Ti Thorn from Covert Products GroupMADE IN USA TITANIUM TI THORNS What is the most minimal tool that you would carry to protect your and others' lives? Not the best tool, not the most sophisticated or effective tool, but the minimum tool? That was the design directive behind the Ti Thorns, and we think we hit pretty close to the mark. Inspired by the truly nasty thorns found in the savannah and some rainforests, these are all titanium and frighteningly pointy. We knew we were onto

MADE IN USA TITANIUM TI THORNS

What is the most minimal tool that you would carry to protect your and others' lives?  Not the best tool, not the most sophisticated or effective tool, but the minimum tool?

That was the design directive behind the Ti Thorns, and we think we hit pretty close to the mark.

Inspired by the truly nasty thorns found in the savannah and some rainforests, these are all titanium and frighteningly pointy.  We knew we were onto something when we were sanding a prototype and (stupidly and accidentally) jammed almost 1/2" of one through our finger with almost no effort, and certainly no intention.

Here are the specs:

  • Overall Length (OAL) approximately 4" with 1.25" hemp wrapped grip
  • 0.06" thick Grade 5 Titanium
  • Carbidized tip on back side
  • POINTY but not sharp; this is a thrusting/poking tool, not a cutting tool
  • Hemp wrap and finger loop (NOT epoxied... see below for why)
  • Black tube sheath (ala @flc_knives) with Kevlar static line

Keep in mind that titanium is NON-MAGNETIC, but it IS METALLIC.  Some metal detectors can pick up titanium, so this is not a 100% non-permissive environment (NPE) tool.  Titanium is also somewhat conductive, so don't stick it in a light socket.

While hemp + epoxy wrap is incredible for grip, we wanted to leave you with the option to remove the wrap easily if there was a need to mount it into a larger handle.  Two pin/wrap/mounting holes are in the small handle under the wrap to help with this purpose.

If they show in stock they are ready to ship.  Orders go out within 24 hours.

Manufacture:

Designed and Manufactured in USA at the CPG worQshop from USA-made and cut Grade 5 Titanium.  As a handmade product, certain variances will occur.

Brand and Country of Origin Markings:

  • Sterile - no brand markings
  • No additional markings or country of origin on product

MADE IN USA TITANIUM SKULL SHIVS

The idea behind these came from wanting something ultra lightweight, ultra slim and non-magnetic to pop in a pocket, slip through PALS webbing or a backpack strap, or even use as a bookmark kept close at hand.  Oh, and it needed to look cool, too.

These are super pointy little pokers:

  • 0.06" thick Titanium
  • Carbidized tip on back side
  • 3D printed and epoxied black or white skull face/grip on one side
  • Black tube sheath (ala @flc_knives) with Kevlar static line

Keep in mind that titanium is NON-MAGNETIC, but it IS METALLIC.  Some metal detectors can pick up titanium, so this is not a 100% non-permissive environment (NPE) tool.  Titanium is also somewhat conductive, so don't stick it in a light socket.

If they show in stock they are ready to ship.  Orders go out within 24 hours.

MADE IN USA TITANIUM SKULL SHIVS

The idea behind these came from wanting something ultra lightweight, ultra slim and non-magnetic to pop in a pocket, slip through PALS webbing or a backpack strap, or even use as a bookmark kept close at hand.  Oh, and it needed to look cool, too.

These are super pointy little pokers:

  • 0.06" thick Titanium
  • Carbidized tip on back side
  • 3D printed and epoxied black or white skull face/grip on one side
  • Black tube sheath (ala @flc_knives) with Kevlar static line

Keep in mind that titanium is NON-MAGNETIC, but it IS METALLIC.  Some metal detectors can pick up titanium, so this is not a 100% non-permissive environment (NPE) tool.  Titanium is also somewhat conductive, so don't stick it in a light socket.

If they show in stock they are ready to ship.  Orders go out within 24 hours.

MADE IN USA TITANIUM SKULL SHIVS

The idea behind these came from wanting something ultra lightweight, ultra slim and non-magnetic to pop in a pocket, slip through PALS webbing or a backpack strap, or even use as a bookmark kept close at hand.  Oh, and it needed to look cool, too.

These are super pointy little pokers:

  • 0.06" thick Titanium
  • Carbidized tip on back side
  • 3D printed and epoxied black or white skull face/grip on one side
  • Black tube sheath (ala @flc_knives) with Kevlar static line

Keep in mind that titanium is NON-MAGNETIC, but it IS METALLIC.  Some metal detectors can pick up titanium, so this is not a 100% non-permissive environment (NPE) tool.  Titanium is also somewhat conductive, so don't stick it in a light socket.

If they show in stock they are ready to ship.  Orders go out within 24 hours.

MADE IN USA TITANIUM SKULL SHIVS

The idea behind these came from wanting something ultra lightweight, ultra slim and non-magnetic to pop in a pocket, slip through PALS webbing or a backpack strap, or even use as a bookmark kept close at hand.  Oh, and it needed to look cool, too.

These are super pointy little pokers:

  • 0.06" thick Titanium
  • Carbidized tip on back side
  • 3D printed and epoxied black or white skull face/grip on one side
  • Black tube sheath (ala @flc_knives) with Kevlar static line

Keep in mind that titanium is NON-MAGNETIC, but it IS METALLIC.  Some metal detectors can pick up titanium, so this is not a 100% non-permissive environment (NPE) tool.  Titanium is also somewhat conductive, so don't stick it in a light socket.

If they show in stock they are ready to ship.  Orders go out within 24 hours.

The idea behind these came from wanting something ultra lightweight, ultra slim and non-magnetic to pop in a pocket, slip through PALS webbing or a backpack strap, or even use as a bookmark kept close at hand.  Oh, and it needed to look cool, too.

These are super pointy little pokers:

  • 0.06" thick Titanium
  • Carbidized tip on back side
  • 3D printed and epoxied black or white skull face/grip on one side
  • Black tube sheath (ala @flc_knives) with Kevlar static line

Keep in mind that titanium is NON-MAGNETIC, but it IS METALLIC.  Some metal detectors can pick up titanium, so this is not a 100% non-permissive environment (NPE) tool.  Titanium is also somewhat conductive, so don't stick it in a light socket.

If they show in stock they are ready to ship.  Orders go out within 24 hours.

The idea behind these came from wanting something ultra lightweight, ultra slim and non-magnetic to pop in a pocket, slip through PALS webbing or a backpack strap, or even use as a bookmark kept close at hand.  Oh, and it needed to look cool, too.

These are super pointy little pokers:

  • 0.06" thick Titanium
  • Carbidized tip on back side
  • 3D printed and epoxied black or white skull face/grip on one side
  • Black tube sheath (ala @flc_knives) with Kevlar static line

Keep in mind that titanium is NON-MAGNETIC, but it IS METALLIC.  Some metal detectors can pick up titanium, so this is not a 100% non-permissive environment (NPE) tool.  Titanium is also somewhat conductive, so don't stick it in a light socket.

If they show in stock they are ready to ship.  Orders go out within 24 hours.

The idea behind these came from wanting something ultra lightweight, ultra slim and non-magnetic to pop in a pocket, slip through PALS webbing or a backpack strap, or even use as a bookmark kept close at hand.  Oh, and it needed to look cool, too.

These are super pointy little pokers:

  • 0.06" thick Titanium
  • Carbidized tip on back side
  • 3D printed and epoxied black or white skull face/grip on one side
  • Black tube sheath (ala @flc_knives) with Kevlar static line

Keep in mind that titanium is NON-MAGNETIC, but it IS METALLIC.  Some metal detectors can pick up titanium, so this is not a 100% non-permissive environment (NPE) tool.  Titanium is also somewhat conductive, so don't stick it in a light socket.

If they show in stock they are ready to ship.  Orders go out within 24 hours.

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 69146609445

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.8 ★★★★★
Based on 10 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
J
Verified Purchase
ju
Carnegie, US
★★★★★ 4
Use
Color: 5-in-1 Battery Operated Wine Set - Silver
Good
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 5, 2026
P
Verified Purchase
Paul Locklair
Cuba, US
★★★★★ 5
Pleasant surprise for a pessimistic person.
Color: 5-in-1 Battery Operated Wine Set - Silver
Works good, except for older bottles with real corks
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 5, 2026
L
Verified Purchase
Lillian Allen
San Leandro, US
★★★★★ 5
Great wine opener
Color: 5-in-1 Battery Operated Wine Set - Silver
Works great! Very pleased!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 8, 2026
C
Verified Purchase
Cyn
Pawtucket, US
★★★★★ 5
Easy to use
Color: 5-in-1 Battery Operated Wine Set - Silver
This is a great style wine opener. It takes all the work out of opening a bottle. The cutter for the seal is easy to use too.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on December 20, 2025
F
Verified Purchase
Flo Ryda
Birmingham, US
★★★★★ 5
Stylish and Efficient Wine Opener.
Color: 6 in 1 wine opener/Silver, Set name: 6-in-1 Electric Wine Opener
I recently purchased the BABONIR 6-in-1 Electric Wine Opener Gift Set and I am delighted to share my experience. This set is incredibly user-friendly. Even if you're not used to electric wine openers, you'll find it a breeze to use. It looks quite fancy and elegant, which adds a touch of sophistication to any gathering. Moreover, it offers great value for the money. The auto cork removal feature works like a charm, making the process of opening a bottle swift and effortless. The inclusion of a USB charger is a fantastic touch, ensuring that the opener is always ready to go when you need it. Overall, I am thoroughly impressed with this product and would highly recommend it to anyone looking for a stylish and efficient wine opener.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 27, 2026

recommand products

Advance Headers - Mitsubishi Triton Ute 4 Cylinder - A342
198.19
Hamilton Beach 46896A 10 Cup Coffee Maker with Vacuum Stainless Thermal Carafe, Black
65.93
By The Way Satchel Embellished Leather Mini
457.50
Keurig K-Duo Coffee Maker, Single Serve and 12-Cup Carafe Drip Coffee Brewer, Compatible with K-Cup Pods and Ground Coffee, Black
182.30
Redback Extreme Duty - Toyota Landcruiser 80 Series Wagon (1990 - 1998) 4.2L 1HZ Performance Exhaust System
835.50