Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 13 - Jul 18
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
Lemon RX LM0087T DSMP 10ch Telemetry Stabilizer, T-Plug Energy MeterHighlight The generation 2 DSMP 10 channel telemetry stabilizer is a complete redesign that provides the ultimate reliability, features and performance. DSMX DSM2 compatible, 10 channel full range telemetry stabilizer with full telemetry features including a built in barometer, altimeter, energy meter (Current, Voltage, mAh), and internal temperature sensor High sensitivity gyro with proprietary stabilization algorithm ensures responsive airplane
Highlight
The generation 2 DSMP 10-channel telemetry stabilizer is a complete redesign that provides the ultimate reliability, features and performance.
- DSMX / DSM2 compatible, 10-channel full-range telemetry stabilizer with full telemetry features including a built-in barometer, altimeter, energy meter (Current, Voltage, mAh), and internal temperature sensor
- High sensitivity gyro with proprietary stabilization algorithm ensures responsive airplane control for both electric and gasoline engine application
- High sensitivity gyro with proprietary stabilization algorithm ensures responsive airplane control for both electric and gasoline engine application
- BEC1 and BEC2 dual inputs allow high-reliability operation while improving setup for high current drain performance servo
- Built-in Delta, V-tail and Normal Wing mixer
- Supports stabilization with separated channel dual aileron operation
- Stabilization always-on feature allows nine usable channels on a 10-channel receiver
- Real-time variable stabilization gain control on channel 8
- All-channel failsafe
- Firmware health monitoring software stack and ultra-low operational voltage (3.6V) ensures high operation reliability
- Generation 2 SDR stack ensures the fastest channel searching and advanced algorithm for signal recovery with ultra-low-latency experience
- Antenna diversity improves the reliability of the wireless link
- Satellite port for additional signal diversity
- Gyro stabilization activation with either AUX2 or Gear channel
- 3 potentiometers for individual gain tuning
User manual
Reset stabilizer
- Connect power
- Hold F and B buttons (approximately 5 secs+) until all LED flashes randomly
- Press the C button. Multiple LEDs flash a few times to complete the operation
Bind with bind plug
- Insert bind plug on Channel 10
- Connect power
Bind without bind plug
- Connect power
- Hold the B button until the red LED flashes
Bind with a satellite without a bind plug
- Connect power
- Hold the B button until the red LED flashes
- Disconnect power
- Plug the satellite wire connector into the stabilizer
- Connect power
Failsafe
- Connect power to the receiver and ensure the servos are working with the transmitter
- Press the F button for 3 seconds until green changes from off to on and vice versa to change the failsafe setting. Channel value is saved as failsafe default at the time the green LED turns on.
- Turn off the transmitter and wait 2 seconds to ensure the failsafe is activated accordingly by ensuring there is torque generated with finger-pushing the servo linkage if it was to be set. Vice versa.
Stabilization activation switch
- Disconnect power
- Insert bind plug to channel 8
- Hold the C button
- Connect power. Wait for about 1 second until the 6 LEDs flash.
- Release the C button
- Press C to make changes within 3 seconds. Green = CH7, Blue = CH5.
- Wait for 3 seconds and remove the bind plug
Wing Mode and Dual Aileron
- Disconnect power
- Insert bind plug to channel 9
- Hold the C button
- Connect power. Wait for about 1 second until the 6 LEDs flash
- Check the receiver label/user manual to understand the referred LEDs' operation
- Release the C button
- Observe which red LED is flashing and brief press C to select the required mode
- Press C to toggle between settings. On means selected. Exit automatically in 5 seconds.
- Wait for 3 seconds and remove the bind plug
- Ensure transmitter mixing is set accordingly for dual aileron if stabilized dual aileron is to be configured.
Gyro direction
- Check the receiver label/user manual to understand the referred LEDs' operation
- Connect power and wait 1 second
- Hold the C button and wait for about 1 second until the 6 LEDs flash
- Release the C button
- Observe which red LED is flashing and brief press C to select the required mode
- Press C to toggle between settings. On means selected. Exit automatically in 5 seconds.
- Wait for 3 seconds and remove the bind plug.
V/I sensor calibration
- Turn on the receiver and transmitter. The telemetry report page may optionally be checked during and after calibration.
- Plug the V/I sensor. Make sure the required DC loading device such as a brushless motor with ESC as well as the current and voltage meter is connected.
- Press the F and B buttons together at the same time for 2 seconds but no greater than 5 seconds
- Observe 3 green LED flashes. Ensure 8.4V is provided to the V/I sensor.
- Press F or C button briefly
- Observe 3 red LED flashes
- Turn on the DC loading device by throttling the transmitter. Ensure 4A is drawing across the V/I sensor. Be careful with the motor spinning if it is to be used.
- Press the B button to save and exit.
V/I probe calibration
- Turn on the receiver and transmitter. The telemetry report page may optionally be checked during and after calibration.
- Plug the V/I sensor. Make sure the required DC loading device such as a brushless motor with ESC as well as the current and voltage meter is connected.
- Press the F and B buttons together at the same time for 2 seconds but no greater than 5 seconds
- Observe 3 green LED flashes. Ensure 8.4V is provided to the V/I sensor.
- Press F or C button briefly
- Observe 3 red LED flashes
- Press the B button to save and exit.
Gain setting
- Adjust via the 3 dials or real-time master gain on channel 8 depending on the transmitter channel's availability.
View setting LEDs with all on
- Press the C button briefly (no more than 2 seconds).
Lemon Rx products are tested to be compatible with Spektrum's DSMX and or DSM2 product (Spektrum, DSMX and DSM2 are the registered trademark of Horizon Hobby, Inc.).
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.3 ★★★★★
Based on 471 reviews
Sort
Product Reviews
★★★★★ 5
Great fit
Size: 10 Short, Color: Eggshell White
Very pleased. Nice fit, soft material.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 4, 2026
★★★★★ 4
Great pants, big pockets, order the right size
Size: 14, Color: Tan
I love these. Amazon thought I was a size 14 but I have to return those. I got a size 12 and love them. Very comfortable, and high waist. The pockets are huge which makes it seem a little weird if you don’t get a small enough size. I have wide hips and a big bottom, and instead of a size 14, a size 12 fits but will probably buy again and get a size 10 in the future. Great for work.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on October 13, 2025
★★★★★ 5
BEST EVER - But you may need to go up a size
Size: 14, Color: Blue Format
Absolutely the BEST jeans ever, particularly for over-50 women who like high-waisted jeans that don't look like "mom jeans." I cannot praise them highly enough. I've purchased four pairs!! The price is outstanding, the quality is superb, and they have ACTUAL pockets. (Why do manufacturers think women don't need real pockets?) I needed to order a size larger than the size guide indicated. The first size I ordered was both tight and too short. The next size up fit like they were made for me. The waistband has a stretchy, comfortable band sewn in that keeps it in place. No high-rise becoming mid-rise because they ride down. (For some of us, our waist is NOT the narrowest part of our torso so the waistband needs to be specifically designed to stay put.) The dark blue color will bleed, so wash by themselves the first time. These jeans look amazing - like those that cost WAY more! I promise you will NOT be disappointed. I wonder if I need a fifth pair...
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 17, 2026
★★★★★ 5
Love these!
Size: 16, Color: Deepest Dark
I recently bought the Lee Women’s Ultra Lux Comfort with Flex Motion Skinny Leg Jean with Ever Fit, and I’m honestly so impressed. The first thing I noticed was how soft and stretchy the fabric feels without seeming thin or cheap. These jeans move with you all day, whether you’re running errands, sitting at work, or going out for dinner. The Flex Motion waistband is incredibly comfortable and doesn’t dig in at all, which is a huge plus for long wear.
The fit is flattering and true to size. They hug in all the right places while still being easy to move around in. I especially love that the Ever Fit design helps them keep their shape throughout the day, so they don’t sag or get baggy at the knees like some other skinny jeans I’ve tried.
The quality feels excellent for the price, and they look polished enough to dress up with boots or keep casual with sneakers. After washing, they held their color and shape beautifully.
Overall, these have quickly become my go-to jeans. Comfortable, flattering, and durable, they’re everything I was hoping for. I would absolutely recommend them to anyone looking for stylish everyday skinny jeans that truly last and feel amazing daily.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 10, 2026
★★★★★ 5
My favorite pair of jeans!
Size: 8 Short, Color: Blue Format
Perfect Fit! Purchased in a size 6 and they fit like a glove!! Excellent, High quality material! Very well made. Durable and rugged. I love this brand and these jeans in particular! Very comfortable, looks amazing! Medium thickness in the fabric (not too thick and not too thin).
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 12, 2026