Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 13 - Jul 18
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
Inner Tie Rod End Set (Male) for Mitsubishi Colt Ldv - TR05554Vehicle Fitment & Part Details This inner tie rod end set (male) is listed for the Mitsubishi Colt Ldv (98 09). It is supplied with RHT M16 x 1. 5 thread, 13. 6 15. 6 mm length. Confirm compatibility by matching the listed fitment details and any OEM reference numbers supplied. Verify VIN engine. Key Details SKU TR05554 Component Inner Tie Rod End (Male) Position Front Axle, Inner Configuration Set Drivetrain 4x2 Trim Hi Line OEM References MB564853,
Vehicle Fitment & Part Details
This inner tie rod end set (male) is listed for the Mitsubishi Colt Ldv (98-09). It is supplied with RHT M16 x 1.5 thread, 13.6/15.6 mm length. Confirm compatibility by matching the listed fitment details and any OEM reference numbers supplied. Verify VIN/engine.
Key Details
- SKU
- TR05554
- Component
- Inner Tie Rod End (Male)
- Position
- Front Axle, Inner
- Configuration
- Set
- Drivetrain
- 4x2
- Trim
- Hi Line
- OEM References
- MB564853, MR241031
- Primary Fitment
- Mitsubishi Colt Ldv (98-09)
- Specs
- RHT M16 x 1.5 thread, 13.6/15.6 mm length
Listing Highlights
- Listed for selected Mitsubishi Colt Ldv applications shown in the fitment table.
- Front axle inner tie rod end (male type) with RHT M16 x 1.5 thread, 13.6/15.6 mm length.
Product Specifications
| Specification | Value |
|---|---|
| Fitting Position | Front Axle, Inner |
| Type | Male |
| Thread Size | RHT M16 x 1.5 |
| Length | 13.6/15.6 mm |
Vehicle Fitment
Includes 1 supplied application covering Mitsubishi Colt. Use the full table below to confirm model, engine option and year range before ordering.
| Make | Model / Application | Year Range |
|---|---|---|
| Mitsubishi | Colt 4X2 LDV 2.0 Hi-Line, Std. 2.0i Hi-Line, 2.4i D/C, Hi-Rider, Hi-Line. 2.5 Hi-Line, Std. P/up, 2.8d Hi-Line, Std. Clubcab, 2.8 TDi Pioneer Rodeo D/C P/up | 98-09 |
Fitment Notes
- Always match the listed vehicle details before ordering. Verify VIN/engine.
Compatibility Verification Notes
- Confirm compatibility using VIN, engine code, chassis / platform, OE reference and original part comparison before ordering.
- Match the supplied dimensions to your original part, including the RHT M16 x 1.5 thread, 13.6/15.6 mm length.
- This male inner tie rod end is supplied as a set. Confirm the type, position and quantity you require before ordering.
- Fitment data may vary by production date, market, import history and engine variant.
- This listing is for part identification and compatibility checking only. Installation must be carried out according to the vehicle manufacturer's service information by a suitably qualified person.
Common Questions
Will this inner tie rod end set (male) fit my Mitsubishi Colt Ldv?
This part (TR05554) is listed for the fitments shown on this page. Confirm by matching the fitment details. Verify VIN/engine.
Is this sold as a single unit or a set?
This listing is sold as a set. Confirm the quantity and type you require before ordering.
How do I confirm fitment if there are multiple variants?
Compare the supplied fitment details, thread and taper sizes, and original part details before ordering. Verify VIN/engine.
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.2 ★★★★★
Based on 1565 reviews
Sort
Product Reviews
★★★★★ 5
BUY THIS ONE!
Model: NewSLS50_52
This is one of the good ones. There are other brands just as good, and manny brands are worse, but this handles well, rolls down easily, doesn't come off at all easily, and adapts to dips and curves like a champ.
Appropriately heavy and dead, I'm happy with the way it smothers panel resonances and even at muffling direct sound, like a big hand over my Uncle Harry's eternally noisy mouth. You can rip the foil but you have to work hard at doing that.
Remember to buy a brayer; you can roll overlaps nice and thin. Also remember to pre-wipe the sheet metal with a decent solvent like acetone or Stoddard/Varsol. It should last forever.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 26, 2025
★★★★★ 5
Good stuff, but watch the temp
Model: NewSLS50_52
I used this in my single cab pickup truck (89 ford.) It only took half the box (10 sheets or 25 square feet) to do the floors, but I bought the big box because I plan to do the doors, back wall, and maybe the roof as well. One thing I learned is that the temperature matters when you’re doing the installation. It was around 55F when I started in the evening, and when it dipped down into the 40s the sheets would not stick to the metal, and were hard to compress with the roller. That’s why I ended up only doing the floors and not any vertical surfaces; i will have to wait for a nice hot day. The other thing is that the foil layer on top is razor sharp at the edges, definitely wear gloves! I didn’t notice until after but I have little papercuts all over my fingers. Aside from those things, the install was easy and straightforward. The sheets cut easily with scissors, and any goo that ends up on your hands or scissors can be cleaned up with acetone (nail polish remover), or lacquer thinner. I would use this stuff again.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on November 16, 2023
★★★★★ 5
Very efficient!
Model: NewSLS50_52
Amazing the difference it makes on dumping the noise. Very easy to install. Pell and stick literally! Great!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on November 23, 2025
★★★★★ 5
Awesome filter! Nasty campground water no longer...
Style: Standard Filter
I have run these for years in my RV and they work killer! Here's some more in-depth thoughts:
Pros:
- These work better than I had expected. Just hook them up to the water source, hook your hose to it, run it to your trailer and viola` clean and good tasting water. Some of the places we have visited have had water that I wouldn't feed to my worst enemy. With this thing attached, it's very good tasting.
- I like the hose attachment that comes with this to aide in adding flexibility to the system and not put too much strain on the system. I have bought so many of these, I now use one attaching the filter to the nozzle, one out of the filter to my hose, and one attaching my hose to the trailer.
Notes:
- I will note that the manufacturer suggesting using these for only 1 camping season, and this makes sense. That's what I do, and it seems to work out great. It's not too much $ to replace every season.
- Another note, when first putting this filter into service (just the first time of the season, subsequent hook-ups wont do this) there will be a bunch of carbon (black in the water) that comes out of the faucet in your trailer. This is perfectly fine, safe, and of no issue. This is the filter breaking in and getting the extra carbon out of the system. There is no health concern with this happening. I just run the faucet until it clears up, and then we're good to go for the rest of the season.
- Last note, when we unhook from our camping spot, I swing the filter in my hand with my arm extended (using centrifugal force, not centrifical, look it up) to get the residual water out of the filter so it doesn't sit in there and spoil. I do this until I get most of the water drops to stop, leave it out on the counter to dry, and boom, it's perfect the next time.
Cons:
- None to report
Overall this filter does a great job taking care of some seriously nasty campground water that we've encountered all over the Southwest US. I cannot recommend it any higher.
I hope I have helped your purchasing decision of this product. I am not affiliated with the manufacturer, seller or any other product related company nor am I under any obligation to write this review. I do this for my own fun and to help others in the Amazon Community! Feel free to comment and let me know if I have helped you, and please note below if this review was able to help. If you should have any questions, please post them below in the Comments. I try to answer all inquires in a timely fashion to the best of my ability.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 26, 2017
★★★★★ 5
Clean, Great-Tasting Water Made Easy with Camco Tastepure
Style: Standard Filter
I installed the Camco Tastepure RV inline water filter on our rig, and it’s another example of why I’ve come to trust Camco products. The reinforced strain relief hose is a small but incredibly smart feature—it keeps the connection between the filter, hose, and RV kink-free and easy to manage. Setup was simple, and the whole system feels sturdy and well-designed.
A tip I’ve learned through experience: before putting a new filter into service, run water through the internal charcoal filter for 30 - 45 seconds. This flushes out any loose charcoal bits and ensures the first water you drink is crystal clean and tastes amazing. After that, connecting to the RV is straightforward, and you immediately notice how much better the water tastes.
Whether filling up a glass or cooking, it’s made a real difference in our RV experience. Reliable, easy to use, and excellent tasting water every time - I highly recommend this to any RV owner who cares about water quality on the road.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 10, 2026